Anman's Tibet Flat-Top Solar Drilling Technology: A New Era in Construction Efficiency

2026-03-04 10:10:02 超级管理员 Engineering Case 78 views

Location: Tibet

Drill Model: Anman AGL-460 Drill

Drilling Configuration: Screw drill rods (3 meters per rod)

Technology Type: Solar micro-piles

Drilling Method: 90-degree straight hole

Geological Conditions: 0-3 meters sandy soil.

Drilling Angle (°): 90

Pile Diameter (mm): 250

Drill Depth (m): 3 meters

Total Drilling Efficiency: 2 minutes

Equipment Average Hourly Fuel Consumption: 6L/H

AGL-460 Drill Procedure and Parameters:

1. Position the drill according to borehole requirements.

2. Connect screw drill rods.

3. Adjust the drill rod to 90° through the variable-angle mechanism.

4. Begin drilling at a consistent speed until reaching a depth of 3 meters, then stop.

5. Raise the drill bit to exit the ground surface.

6. Complete drilling and move the machine to the next borehole position.